|
Product Details:
|
| Item: | 6G SDI Video BIDI Dual Receivers | Technology: | 2 Receiver In BOSA, 1 Fiber |
|---|---|---|---|
| Package: | SFP | Center Wavelength: | RX1_1310nm/RX2_1490nm |
| Interface: | Simplex LC | Operating Temperature: | -5 To 70°C |
| Warranty: | 3 Years | Keywords: | 6G-SDI Dual PIN Receiver Module |
6G SDI SMPTE SFP RX1310nm RX1490nm PIN 10km SMF BIDI LC Dual Receivers Module Non-MSA
Functional Specification
| Item Name | 6G SDI SMPTE SFP Dual Receivers | P/N | GTS-B3460-10DCRR |
| Module Type | Dual RX in BOSA, 1 fiber | Bandwidth (Gbps) | 0.143Gbps - 5.94Gbps |
| Form Factor | SFP BIDI | Environment | Operating -5 to 70°C |
| Wavelength | RX1_1310nm/RX2_1490nm | Reach | 10km @ 9/125μm SMF |
| Connector Type | LC Simplex | Cable Type | G.652 SMF |
| Transmitter Part | N/A | Receiver Type | PIN photo-detector |
| Power Supply Voltage | 3.3V | Supply Current (Max) | 500mA |
| Receiver Sensitivity | <-15dBm | Input Saturation Power | > 0dBm |
| Diagnostic (DDM/DOM) | Support | Pin Assignment | Non-MSA Pinout |
| Unit Weight | 0.025kg | Warranty Limited Time | 36-Month |
| Application | SD/HD/3G/6G SDI | ||
Description
The GTS-B3460-10DCRR is a 1-fibre Bi-Directional dual channel receiver module designed to receive optical serial digital signals as defined in SMPTE 297-2006. It supports the data rates from 143Mb/s to 5.94Gb/s.This dual receiver module is specifically designed for robust performance in the presence of SDI pathological patterns for SMPTE 259M, SMPTE 344M,SMPTE 292M,SMPTE 424M and ST-2081 serial rates.
It is with the SFP 20-pin connector to allow hot plug capability. It is with two independent 1310 nm and 1490 nm PIN photo detector. A maximum distance of 10 km is achievable with 6Gb/s pathological signals.
Features
Application
Standard
Pin Definition
| Pin No | Symbol | Name/Description | Power Seq. | Notes |
| 1 | VeeR | Receiver Ground | 1st | |
| 2 | RD2- |
Receiver(1310nm) Inverted DATA out. AC Coupled. CML-O |
3rd | |
| 3 | RD2+ |
Receiver(1310nm) Non-inverted DATA out. AC Coupled. CML-O |
3rd | |
| 4 | MOD_ABS | Module Absent, Connect to VeeR in Module | 3rd | 1 |
| 5 | SCL | 2-Wire Serial Interface Clock Line, LVTTL-I | 3rd | 2 |
| 6 | SDA | 2-Wire Serial Interface Data Line, LVTTL-I/O | 3rd | 2 |
| 7 | VeeR | Receiver Ground | 3rd | |
| 8 | NC | Not Connected | 3rd | |
| 9 | NC | Not Connected | 3rd | |
| 10 | RX_LOS1 |
Receiver(1490nm) Loss of Signal indication, LVTTL-O High: loss of signal Low: signal detected |
1st | 3 |
| 11 | VeeR | Receiver Ground | 1st | |
| 12 | RD1- |
Receiver(1490nm) Inverted DATA out. AC Coupled. CML-O |
3rd | |
| 13 | RD1+ |
Receiver(1490nm) Non-inverted DATA out. AC Coupled. CML-O |
3rd | |
| 14 | VeeR | Receiver Ground | 1st | |
| 15 | VccR | Receiver Power Supply | 2nd | |
| 16 | VccR | Receiver Power Supply | 2nd | |
| 17 | VeeR | Receiver Ground | 1st | |
| 18 | NC | Not Connected | 3rd | |
| 19 | NC | Not Connected | 3rd | |
| 20 | RX_LOS2 |
Receiver(1310nm) Loss of Signal indication, LVTTL-O High: loss of signal Low: signal detected |
1st | 4 |
Power Seq.: Pin engagement sequence during hot plugging.
Note 1. MOD_ABS is connected to VeeT inside the module.
Note 2. SDA&SCL (I2C) shall be pulled up with 4.7k - 10kΩ resistors on host board.
Note 3. RX_LOS1 shall be pulled up with 4.7k - 10kΩ resistors on host board.
Note 4. T RX_LOS2 shall be pulled up with 4.7k - 10kΩ resistors on host board.
Package Outline
Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)
Contact Person: Ophelia Feng
Tel: +86 15882203619
