|
Product Details:
|
| Product Name: | 1000BASE-EX SFP | Form Type: | SFP |
|---|---|---|---|
| Data Rate(Gbps): | Data Rate(Gbps) | Max Distance: | 40km (24.8 Mi.) |
| Optical Receptacle Type: | Duplex LC | Optical Components: | DFB 1310nm |
| DOM Support: | Yes | Power Budget: | 24dB |
| Keywords: | Industrial 1.25G SFP 40km Transceiver, SFP 1310nm 40km Fiber Module | ||
| Highlight: | 1000BASE EX SFP Optical Transceiver,40km SFP Optical Transceiver,1310nm Industrial SFP |
||
Cisco Compatible 1000BASE-EX Industrial SFP Transceiver Module 1.25Gbps 1310nm 40km DOM Duplex LC SMF
Description
The GIGAOPTO's GTS-L1312-40DI SFP transceiver supports dual data-rate of 1.25Gbps/1.0625Gbps and 40km transmission distance over LC duplex SMF fiber. Featuring low power consumption, this 1000BASE-EX SFP industrial optic transceiver is a small form factor pluggable (SFP) transceiver specified for hardened industrial 1000BASE-EX Gigabit Ethernet and 1G Fiber Channel application in harsh environments.
The SFP transceiver consists of the below sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm DFB laser and the PIN photo-detector. The SFP transceiver module is a Class 1 laser product that complies with FDA/CDRH and IEC-60825 standards.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Specification
| Compatible Brand | CISCO | Compatible Part Number | GLC-EX-SMD |
| Product Packaging | SFP | Data Link | 1000Mbps |
| Device Interface | LC duplex connector | Link Length | 40km (24.9 miles) |
| DOM | YES | Cable Type | SMF |
| Power Budget | 24dB | Ambient Temperature |
Industrial -40 to 85°C (-40 to 185°F) |
| Wavelength | 1310nm | Power Supply Voltage | 3.3V |
| Power Consumption | <1.0W | Icc | 300mA |
| Laser Type | DFB 1310nm | Photo-detector | PIN |
| Transmitter Output Power | -5 ~ 0dBm | Receiver Sensitivity | < -24dBm |
| Extinction Ratio | >9dB | Saturation | >-3dBm |
| Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | ||
Notice: When the long reach transceiver is used in short distance transmission, please matched with appropriate attenuator
according to the table.
| Distance | ≤10km | ≤20km |
| Attenuator | 10dB | 5dB |
Features
Application
Ordering Information
| P/N | Description | Speed | Wavelength | Reach | Interface | Temp. |
| GTS-T0012-10I-A | 1000BASE-T SFP Copper | 1.25Gb/s | / | 100m | RJ-45 | -40~85℃ |
| GTS-L0812-02DI | 1000BASE-SX SFP | 1.25Gb/s | 850nm | 550m@OM2 | Dual LC | -40~85℃ |
| GTS-L1312-10DI | 1000BASE-LX SFP | 1.25Gb/s | 1310nm | 10km | Dual LC | -40~85℃ |
| GTS-L1312-40DI | 1000BASE-EX40 SFP | 1.25Gb/s | 1310nm | 40km | Dual LC | -40~85℃ |
| GTS-L1512-80DI | 1000BASE-ZX SFP | 1.25Gb/s | 1550nm | 80km | Dual LC | -40~85℃ |
Contact Person: Ophelia Feng
Tel: +86 15882203619
