|
|
Product Details:
|
| Type: | 3Gbps Compact SFP Transceiver | Bit Rate(Gbps): | 3Gbps/3Gbps |
|---|---|---|---|
| Wavelength(Ch1): | TX1550nm/RX1310nm | Wavelength(Ch2): | TX1310nm/RX1550nm |
| Laser/Photodiode: | FP+PIN-TIA | Distance: | 100m |
| Cable Type: | MMF | DOM: | Supported |
| Highlight: | Dual Fiber 3G CSFP 100m |
3Gbps Tx1550Rx1310nm and 3Gbps Tx1310Rx1550nm Multi-Mode 100m LC BIDI Compact SFP (CSFP) Transceiver
Description
The GCS-B5330-B3530-10C compact small form-factor pluggable (CSFP) is a version of SFP with the same mechanical form factor allowing two independent bidirectional channels per port.
For Channel 1, the transceiver consists of a 1550nm FP laser transmitter and a 1310nm PIN-TIA receiver.
For Channel 2, the transceivers consists of a 1310nm FP laser transmitter and a 1550nm PIN-TIA receiver.
A max transmission up to 100 meters over multi-mode fiber cable with duplex LC connector.
It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C interface as specified in the MSA SFF-8472.
The transceiver is fully compatible with Compact SFP Multi-Source Agreement (MSA) and CE/RoHS certificated.
Specifications
| Product Category | 3G CSFP Transceiver | P/N | GCS-B5330-B3530-10C |
| Form Factor | CSFP | Type | 2 BOSA in one SFP port |
| Data-Rate (CH1/CH2)) | 3Gbps/3Gbps | Lane Count | 2x ( Tx/Rx ) |
| Link Length | 100 meters | Connector | Dual LC |
| Wavelength (CH1) | TX1550nm/RX1310nm | Wavelength (CH2) | TX1310nm/RX1550 |
| Power Supply Voltage | +3.3V (typical) | Power Consumption | ≤ 1.5W |
| LD Type (CH1/CH2) | FP laser | PD Type (CH1/CH2) | PIN+TIA |
| Transmitter Power | -3 ~ +2dBm | Receiver Sensitivity | < -20dBm |
| Extinction Ratio | > 4dB | Overload | > 0dBm |
| Power Budget (dB) | 17dB | DOM/DDM | support |
| Environment | Operating: 0 to 70°C | Warranty | 3 years |
| Storage: -40°C to 85°C | Weight | 0.03kg | |
| Compliance | Gigabit Ethernet, MSA Compliant | ||
Features
Application
Electrical and Optical Characteristics
| Electrical Characteristics (3G, Channel 1 and Channel 2) | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Transmitter | ||||||
| Transmitter Differential Input Voltage | 200 | 1600 | mV | |||
| Tx_Fault Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| Tx_Fault Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Tx_Disable Input Voltage - High | VIH | 2 | Vcc | V | LVTTL | |
| Tx_Disable Input Voltage - Low | VIL | 0 | 0.8 | V | LVTTL | |
| Input Differential Impedance | ZIN | 85 | 100 | 115 | Ω | |
| Receiver | ||||||
| Receiver Differential Output Voltage | 600 | 1000 | mV | |||
| LOS Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| LOS Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Output Differential Impedance | ZOUT | 90 | 100 | 110 | Ω | |
| Optical Transmitter Characteristics (3G, Channel 1) | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Average Output Power | POUT | -3 | +2 | dBm | |||
| Center Wavelength | λc | 1500 | 1550 | 1580 | nm | Channel 1 | |
| 1280 | 1310 | 1360 | Channel 2 | ||||
| Spectral Width | ∆λ | 3.5 | nm | ||||
| Extinction Ratio | ER | 4 | dB | ||||
| Transmitter OFF Power | POFF | -45 | dBm | ||||
| Jitter P-P | TJ | 0.1 | UI | ||||
| Output Eye Diagram | Complies with FC PI-4 REV 8.0 | ||||||
| Optical Receiver Characteristics (3G, Channel 1) | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Center Wavelength | λc | 1280 | 1310 | 1360 | nm | Channel 1 | |
| 1500 | 1550 | 1580 | Channel 2 | ||||
| Receiver Sensitivity | PSEN | -20 | dBm | Note 1 | |||
| Input Saturation Power (Overload) | PSAT | 0 | dBm | ||||
| LOS De-assert Level | LOSD | -20 | dBm | ||||
| LOS Assert Level | LOSA | -39 | dBm | ||||
| LOS hysteresis | HYS | 0.5 | 6 | dB | |||
Note 1. Measured with PRBS223-1 pattern, @3Gbps, ER=6dB, BER=1x10-10.
Contact Person: Ophelia Feng
Tel: +86 15882203619
