|
Product Details:
|
| Product: | QSFP-100G-DR Transceiver | Technology: | QSFP28 PAM4 Single Lambda |
|---|---|---|---|
| Speed (Gb/s): | 106.25Gb/s | Wavelength: | 1310nm |
| Transmission: | 500m | Components: | EML+PIN |
| Interface: | Dual LC | Temperature: | COM |
| Keywords: | QSFP-100G-DR, QSFP28 DR | ||
| Highlight: | single lambda 100g,100GBASE DR,100g pam4 qsfp28 |
||
QSFP 100G DR1 Single Lambda Optical Transceiver Module (Single Lambda, SMF, 1310nm, 500m, LC, DOM)
Description
The 100G QSFP28 DR1 Transceiver is designed to transmit and receive serial optical data links up to 106.25Gb/s data rate by PAM4 modulation format over single-mode fiber. It consists of a 1310 nm wavelength EA-DFB LD, a Driver IC, a PIN photo-diode, and clock and data recovery (CDR) Ics with a 4 channel X 25.78125 Gbit/s electrical interface.
This transceiver is fully compliant with QSFP28 Multi-Source Agreement (MSA), 100G Lambda MSA, IEEE 802.3 100GBASE-DR and CAUI-4 standard.
Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as Data Center, 100G Ethernet, 400G to 100G breakout applications.
Specification
| Product Name | QSFP 100G DR | Part/ Number | GTQ-L13D1-P5DC |
| Form Type | QSFP28 Single Lambda | Max Speed (Gbps) | 106.25Gbps |
| Wavelength (typical) | 1310nm | Cable Distance | 500m |
| Connector | LC Duplex | Fiber Type | SMF |
| TOSA Type | EML | ROSA Type | PIN |
| TX Power (dBm) | -2.9~4dBm | Receiver Sensitivity | <-5.9dBm |
| Power-budget (dB) | 3dB | Overload | >4dBm |
| Power Dissipation | ≤4.5W | Ext. Ratio | >3.5dB |
| DDM | Support | Commercial Temperature | 0 to 70°C |
| FEC Function | Support | Modulation Format | PAM4 |
| CDR (Clock and Data Recovery) | TX and RX | OEM/ODM | Supported |
| Warranty | 3 Years | ||
| Protocols | IEEE 802.3cd 100GBASE-DR Specification compliant | ||
| Note | Full 500m reach requires the use of FEC on the host platform. | ||
Features
Application
Optical Specifications
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Transmitter (per Lane) | ||||||
| Signaling Speed per Lane | GBd |
53.125± 100pm |
||||
| Modulation format | PAM4 | |||||
| Center wavelength | nm | 1304.5 | 1310 | 1317.5 | ||
| Side-mode suppression Ratio | SMSR | dB | 30 | |||
| Optical output power | PAVG | dBm | -2.9 | 4 | ||
| Outer Optical Modulation Amplitude | OMAouter | dBm | -0.8 | 4.2 | ||
| Launch power in OMAouter minus TDECQ, each lane (min): for extinction ratio>= 5 dB | dBm | -2.2 | ||||
| Launch power in OMAouter minus TDECQ, each lane (min): for extinction ratio < 5dB | dBm | -1.9 | ||||
| Transmitter and dispersion penalty eye closure for PAM4 | TDECQ | dB | 3.4 | |||
| Average Launch Power of Off Transmitter | dBm | -15 | ||||
| Optical Extinction Ratio | ER | dB | 3.5 | |||
| RIN15.5 OMA(max) | dB/Hz | -136 | ||||
| Optical Return Loss Tolerance | ORL | dB | 15.5 | |||
| Transmitter reflectance | dB | -26 | ||||
| Receiver(per Lane) | ||||||
| Signaling Speed per Lane | GBd |
53.125± 100pm |
||||
| Modulation format | PAM4 | |||||
| Input Operating Wavelength | nm | 1304.5 | 1310 | 1317.5 | ||
| Damage threshold | dBm | 5 | ||||
| Average receive Power per Lane | dBm | -5.9 | 4 | |||
| Receiver sensitivity(OMA outer) | dBm | -3.9 | SECQ≤1.4dB | |||
| dBm | SECQ-5.3 | SECQ≥1.4dB | ||||
| Receive Power (OMAouter) | dBm | 4.2 | ||||
| Receiver reflectance (max) | dBm | -26 | ||||
| Stressed Receiver Sensitivity (OMAouter) | dBm |
|
-1.9 | |||
Electrical Specification
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Supply Voltage | VCC | V | 3.14 | 3.47 | ||
| Supply Current | ICC | mA | 1154 | |||
| Power Consumption | W | 4.0 | ||||
| Transmitter | ||||||
| Data Rate | BR | Gbps | 26.5625 | NRZ | ||
| Differential pk-pk input voltage | mV | 900 | at TP1a | |||
| Differential termination mismatch | % | 10 | at TP1 | |||
| SCL and SDA High | VIH | V | 2 | 3.5 | Input Voltage High | |
| SCL and SDA Low | VIL | V | -0.3 | 0.8 | Input Voltage Low | |
| LPMode High | VIH | V | 2 | 3.5 | Input Voltage High | |
| LPMode Low | VIL | V | -0.3 | 0.8 | Input Voltage Low | |
| Receiver | ||||||
| Data Rate | BR | Gbps | 26.5625 | NRZ | ||
| Differential Output Swing | VRXDIFF | mV | 900 | At TP4 | ||
| Differential Eye Height | VEH | mV | 228 | |||
| Eye Width | UI | 0.57 | ||||
| IntL Output Voltage High | VOH | V | 2 | 3.5 | Output Voltage High | |
| IntL Output Voltage Low | VOL | V | -0.3 | 0.8 | Output Voltage Low | |
Compatibility
All Gigaopto’s transceivers are standards-based and MSA (Multi-Source Agreement) compliant, and rigorously tested and coded in our own facilities to ensure the highest level of performance. We conduct 100% application testing under end-use conditions.
For this QSFP28 100G DR Single Lambda GTQ-L13D1-P5DC, please refer to the P/N correspondence table. For more product compatibility, please feel free to contact us.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTQ-L13D1-P5DC | Arista | QSFP-100G-DR |
| Cisco | QSFP-100G-DR-S | Brocade | QSFP28-DR-100G |
| Mellanox | MMS1V70-CM | Juniper | QSFP-100G-DR |
| Extreme | QSFP28-DR-100G | HW | QSFP28-DR-100G |
| Dell | QSFP28-DR-100G | H3C | QSFP28-DR-100G |
Package Outline
Contact Person: Ophelia Feng
Tel: +86 15882203619
