|
Product Details:
|
| Product Name: | QSFP28-PSM4-100G | Speed(Gb/s): | 100Gb/s |
|---|---|---|---|
| Transmitter Type: | 4x DFB Laser | Wavelength: | 1310nm |
| Connector Type: | MTP/MPO | Cable Type: | SMF MPO-12 | MPO-8 For Breakout |
| Max Cable Length: | 2 Kilometers (1.24 Miles) | DDM/DOM: | Supported |
| Keywords: | 100G PSM4, QSFP28 100GBASE PSM4 2km | ||
| Highlight: | QSFP28 100 Gbps Optical Transceiver,SMF 100 Gbps Optical Transceiver,MTP MPO Transceiver |
||
100GBASE-PSM4 QSFP28 SMF 1310nm 2km Optical Transceiver Module MPO DOM for Date Center HPC
Description
The QSFP28 PSM4 optical transceiver is a monolithic electronic and photonic module assembly containing four independent parallel 1310nm optical channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s up to 2km over standard single mode fiber.
The optical interface of the module is a 12-fiber MTP/MPO receptacle compliant to 100G PSM4 MSA, it provides an excellent solution for 100G applications where cost-effective high port density is needed.
This 100Gbps PSM4 module incorporates Gigaopto's proven circuit and Optical technology to provide reliable long life, high performance, and consistent service, each transceiver is fully compatible with mainstream devices and 3 years warranty.
DDM functionality(alarm and warning features) is integrated into the design via an I2C serial interface per the Multi-Source Agreement (MSA) SFF8636, Rev. 2.5.
In additionally, this optical transceiver supports FEC (Forward Error Correction) function which will help receiving side detect and correct bit errors and improve the overall quality of the link.
The optical transceiver is compliant per the RoHS Directive 2011/65/EU.
Specification
| Form Factor | QSFP28 100G PSM4 | Max Data Rate | 103.125Gbps (4x 25.78Gbps) |
| Wavelength | 1310nm | Max Cable Distance | 2km |
| Connector | MTP/MPO-12 | Media | SMF |
| Transmitter Type | 4x DFB | Receiver Type | PIN |
| TX Power | -6.0~2dBm | Receiver Sensitivity | <-10.5dBm |
| Power-budget | 4.5dB | Receiver Overload | >2dBm |
| Power Consumption | ≤3.5W | Extinction Ratio | >3.5dB |
| DDM/DOM | Supported | Temperature Range | 0 to 70°C (32 to 158°F) |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR | FEC Function | Supported |
| OEM/ODM | Supported | Warranty Time | 3 years |
| Protocols | 100G Ethernet, QSFP28 MSA Compliant, IEEE 802.3 | ||
Features
Applications
Standard
Optical Specification
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Transmitter (per Lane) | ||||||
| Signaling rate per lane | Gbps | 25.78125 | ||||
| Center wavelength | λc | nm | 1295 | 1310 | 1325 | |
| Spectral Width(-20dB) | SW | nm | 1 | |||
| Transmit OMA per Lane | TxOMA | dBm | -5.0 | 2.2 | ||
|
Average Launch Power per Lane |
TXPx | dBm | -6.0 | 2.0 | ||
| Optical Extinction Ratio | ER | dB | 3.5 | |||
| Transmitter and Dispersion Penalty per lane | TDP | dB | 3 | |||
| Side-Mode Suppression Ratio | SMSR | dB | 30 | |||
| Relative Intensity Noise | RIN | dB/Hz | -128 | |||
| Optical Return Loss Tolerance | dB | 20 | ||||
| Transmitter Reflectance | dB | -12 | ||||
|
Average launch power of OFF Transmitter, each lane |
dBm | -30 | ||||
|
Transmitter Eye mask definition {X1,X2,X3, Y1,Y2,Y3} |
{0.31,0.4,0.45,0.34,0.38,0.4} | Hit ratio 5x10-5 | ||||
| Receiver(per Lane) | ||||||
| Signaling rate per lane | Gbps | 25.78125 | ||||
| Center wavelength | λIN | nm | 1295 | 1310 | 1325 | |
| Damage Threshold Per Lane | DT | dBm | 3.5 | |||
|
Average receive Power per Lane |
RXPx | dBm | - | 2.5 | ||
| RX Sensitivity (OMA) per Lane | Rsens | dBm | - | -10.5 | 5x10-5 BER | |
| Receiver reflectance | Rfl | dB | -26 | |||
| LOS De-Assert | LOSD | dBm | -12 | |||
| LOS Assert | LOSA | dBm | -18 | |||
| LOS Hysteresis | dB | 0.5 | 1.5 | 5 | ||
Electrical Specification
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Supply Voltage | VCC | V | 3.135 | 3.3 | 3.465 | |
| Supply Current | ICC | A | 1.06 | |||
| Power Consumption | Pc | W | 3.5 | |||
| Transmitter | ||||||
| Signaling rate per lane | Gbps | 25.7812 | ||||
| Input Differential Impedance | RIN | Ω | 90 | 100 | 110 | |
| Differential data input swing | VIN | mVp-p | 180 | 900 | ||
| Receiver | ||||||
| Signaling rate per lane | Gbps | 25.7812 | ||||
| Output Differential Impedance | ROUT | Ω | 90 | 100 | 110 | |
| Differential data output swing | VOUT | mVp-p | 400 | 800 | ||
| IIC communication | ||||||
| IIC Clock frequency | - | KHz | 100 | 400 | ||
Compatibility
Gigaopto's optical transceivers are 100% compatible with all major switch brands and will not cause damage to OEM devices.
In order to ensure the quality and compatibility of our products, each product is carefully tested on the corresponding equipment before delivery to customers.
For this 100G PSM4 2km GTQ-M13B4-02DC compatibility, please refer to the P/N correspondence table. If the brand and part number you are looking for is not listed below, please let us know and we will be delighted to provide you with more details.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTQ-M13B4-02DC | Arista | QSFP28-PSM4-100G |
| Cisco | QSFP28-PSM4-100G | HW | QSFP28-PSM4-100G |
| Extreme | QSFP28-PSM4-100G | Juniper | QSFP28-PSM4-100G |
| Dell | QSFP28-PSM4-100G | Mellanox | QSFP28-PSM4-100G |
| H3C | QSFP28-PSM4-100G | ||
Package Dimensions
For More of our QSFP28 100GBASE Transceiver Series, please refer to the following form
| Part Number | Description | Wave Length | Length | Media | TX Power (dBm) | Rx Sens. (dBm) |
| GTQ-M08B4-01DC | QSFP28 100G SR4 | 850nm | 100m | MMF | -8.4~2.4 | <-10.3 |
| GTQ-M08B4-02DC | QSFP28 SR BD | 850/900nm | 100m | MMF | -5.5 - 3 | <-9.5 |
| GTQ-M08B4-03DC | 100GBASE eSR4 | 850nm | 300m | MMF | -8.4~2.4 | <-10.3 |
| GTQ-M13B4-P5DC | QSFP28 PSM4-S | 1310nm | 500m | SMF | -9.4~2 | <-12.66 |
| GTQ-M13B4-02DC | QSFP28 PSM4-S | 1310nm | 2km | SMF | -6.0~2 | <-10.5 |
| GTQ-L27B4-02DC | 100G CWDM4 | 1311nm CWDM | 2km | SMF | -6.5~2.5 | <-11.5 |
| GTQ-L27B4-10DC | 100G eCWDM4 | 1311nm CWDM | 10km | SMF | -6.5~2.5 | <-13 |
| GTQ-L13B4-10DC | QSFP28 LR4 | LAN WDM | 10km | SMF | -4.3~4.5 | <-10.6 |
| GTQ-L13B4-20DC | QSFP28 eLR4 | LAN WDM | 20km | SMF | -4.3~4.5 | <-14.5 |
| GTQ-L13B4-40DC | QSFP28 ER4 Lite | LAN WDM | 40km(with FEC) | SMF | -2.9~4.5 | <-20.9d |
| GTQ-L13B4-80DC | QSFP28 ZR4 | LAN WDM | 80km | SMF | 2~6.5 | <-28 |
| GTQ-N13B4-10MC | Dual 100/112G LR4 | LAN WDM | 10km | SMF | -4.3~4.5/-0.6~4 | <-8.6/<-8.4 |
| GTQ-N13B4-20MC | Dual 100/112G eLR4 | LAN WDM | 20km | SMF | -1.0~+4.5/0~4 | <-9.5/<-9.0 |
| GTQ-N13B4-40MC | Dual 100/112G ER4 | LAN WDM | 40km | SMF | -2.5~2.9/-1~3.3 | <-15/<-19 |
| GTQ-L13D1-P5DC | 100G QSFP28 DR1 | 1310nm | 500m | SMF | -2.9~4 | <-5.9 |
| GTQ-L13D1-02DC | 100G QSFP28 FR1 | 1310nm | 2km | SMF | -2.4~4 | <-6.4 |
| GTQ-L13D1-10DC | 100G QSFP28 LR1 | 1310nm | 10km | SMF | -1.4~4.5 | <-7.7 |
Note: OEM/ODM supported.
Contact Person: Ophelia Feng
Tel: +86 15882203619
