|
Product Details:
|
| Product Name: | SFP-10G-ER40 | Data Rate: | 10Gb/s |
|---|---|---|---|
| Form Factor: | SFP+ | Wavelength: | 1310nm |
| Reach: | 40km | Connector: | LC Duplex |
| DOM: | Supported | Warranty: | 3-year |
| Keywords: | SFP+ 10GBASE-ER40, SFP-10G-ER 40km 1310nm |
SFP-10G-ER40 1310nm Wavelength 40km Single Mode Fiber Transceiver Module for Ethernet
Description
This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm. The maximum link reaches up to 40km via an LC duplex connector. The transmitter section uses a 1310nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The 1310nm 10G ER transceiver module offers a variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closets and service provider transport applications.
The 10G 1310nm ER40 transceiver complies with SFP+ MSA specifications (SFF-8431, SFF-8432, SFF-8472), 10 Gigabit Ethernet specifications (10GBASE-ER/EW per IEEE 802.3ae ), and 10G Fibre Channel. It’s suitable for use in 10GbE Ethernet switches, routers, network interface cards (NICs), fiber media converters and storage networking equipment.
Digital diagnostic monitoring (DDM/DOM) is available via a 2-wire serial interface, as specified in SFF-8472, which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage
Specification
| Form Factor | SFP+ | Max Bit Rate | 11.3Gbps |
| Center Wavelength | 1310nm | Max Reach | 40km |
| Connector | Duplex LC receptacle | Fiber Type | SMF |
| LD Type | DFB | Receiver Type | PIN |
| TX Output Power | 1~6dBm | RX Sensitivity | < -14.4dBm |
| Optical budget | 15dB | Extinction Ratio | >3.5dB |
| Power Consumption | ≤1.5W | Average Receiver Power | <0.5dBm |
| DOM Support | Supported | Temperature | 0 to 70°C |
| OEM/ODM | Yes | Warranty Limited Time | 3 years |
| Protocols | SFP+ MSA Compliant, CPRI, eCPRI | ||
| Compliance | IEC/EN 61000-4-2, IEC-60825,FDA 21CFR 1040.10 and 1040.11,RoHS | ||
Notice: When the long reach transceiver is used in short distance transmission, please matched with appropriate attenuator according to the table.
| Distance | ≤ 1km | ≤ 10km | ≤ 15km | ≤ 20km | ≤ 30km | ≤ 40km |
| Attenuator | 12dB | 12dB | 9dB | 7dB | 5dB | 2dB |
Features
Commercial: -5°C~70°C
Industrial: -40°C~85°C
Application
Standard
Electrical and Optical Characteristics
| Electrical Characteristics | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Total Supply Current | ICC | 300 | mA | |||
| Transmitter | ||||||
| Transmitter Differential Input Voltage | 180 | 1200 | mV | |||
| Tx_Fault Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| Tx_Fault Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Tx_Disable Input Voltage - High | VIH | 2 | Vcc | V | LVTTL | |
| Tx_Disable Input Voltage - Low | VIL | 0 | 0.8 | V | LVTTL | |
| Input Differential Impedance | 90 | 100 | 110 | Ω | ||
| Receiver | ||||||
| Receiver Differential Output Voltage | 300 | 850 | mV | |||
| LOS Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| LOS Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Output Differential Impedance | 90 | 100 | 110 | Ω | ||
| Optical Transmitter Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Average Output Power | POUT | 1 | 6 | dBm | |||
| Center Wavelength | λc | 1320 | 1330 | 1340 | nm | ||
| Spectral Width(-20dB) | ∆λ | 1 | nm | ||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | ||||
| Extinction Ratio | ER | 3.5 | dB | ||||
| Relative Intensity Noise | RIN | -128 | dB/Hz | ||||
| Optical Rise/Fall Time | TR/TF | 28 | 50 | ps | |||
| Transmitter and Dispersion Penalty | TDP | 3.2 | dB | ||||
| Transmitter OFF Power | POFF | -45 | dBm | ||||
| Output Eye Diagram | Complies with IEEE802.3ae | ||||||
| Optical Receiver Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Center Wavelength | λc | 1260 | 1610 | nm | |||
| Receiver Sensitivity | PSEN | -14.4 | dBm | 1 | |||
| Input Saturation Power (Overload) | PSAT | 0.5 | dBm | ||||
| Receiver Reflectance | -12 | dB | |||||
| LOS De-assert Level | LOSD | -17 | dBm | ||||
| LOS Assert Level | LOSA | -30 | dBm | ||||
| LOS hysteresis | HYS | 0.5 | 6 | dB | |||
Note 1. Measured with PRBS231-1 pattern, @10.3125Gbps, ER=4dB, BER=1x10-12.
Compatibility
All Gigaopto’s transceivers are standards-based and MSA (Multi-Source Agreement) compliant, and rigorously tested and coded in our own facilities to ensure the highest level of performance. We conduct 100% application testing under end-use conditions.
For this SFP+ 10G ER GTS-L1396-40DC, please refer to the P/N correspondence table. For more product compatibility, please feel free to tell us.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTS-L1396-40DC | Arista | SFP-10G-ER40 |
| Cisco | SFP-10G-ER40 | Juniper | EX-SFP-10GE-ER40 |
| Dell | 330-2404-40 | Brocade | 10G-SFPP-ER40 |
| HPE | JD094A-40 | Ciena | 12275 |
| HW | SFP-10G-ER40 | Ciena | XCVR-S40V31 |
Package Outline
Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)
Contact Person: Ophelia Feng
Tel: +86 15882203619
