Product Details:
|
Product Name: | 10GBASE-SR | Bit- Rate: | 10Gb/s |
---|---|---|---|
Form Type: | SFP+ | Device Type: | Transceiver Module |
Wavelength: | 850nm | Fiber Type: | MMF |
Components: | VCSEL+PIN | Reach: | 300m@OM3/400m@OM4 |
Keywords: | SFP+ 10GBASE-SR, SFP-10G-SW | ||
High Light: | Multimode SFP+ Optical Transceiver,850nm SFP+ Optical Transceiver,300m 10GBASE SR |
SFP-10G-SR Optical Transceiver Module MMF 850nm 300m LC DOM
Description
The 850nm 10Gbps transceiver is SFP+ housing module for duplex optical data communications such as 10GBASE-SR and 10GBASE-SW.
It supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector.
The 10G SR transceiver consists of two sections, the transmitter section uses a Vertical Cavity Surface Emitted Laser driver (VCSEL) and is a Class 1 laser compliant according to International Safety Standard IEC 60825, the receiver section uses a PIN photodiode integrated with a transimpedance preamplifier (TIA).
This SFP-10G-SR transceiver is compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
Featuring low power consumption and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Base-band Units, etc
Each transceiver is 100% optically inspected and tested for reliability, interoperability and compatibility before shipping.
Specification
Form Factor | SFP+ | Max Data Rate | 11.3Gb/s |
Center Wavelength | 850nm | Cable Distance | 300m@OM3/400m@OM4 |
Connector Type | Dual-LC receptacle | Media | Multimode Fiber |
Transmitter | VCSEL | Receiver | PIN |
TX Power | -6~-1dBm | Receive Sensitivity | < -10dBm |
Power-budget | 4dB | Extinction Ratio | >3.5dB |
Power Consumption | ≤0.6W typical | Receiver Overload | >0.5dBm |
Digital Diagnostic Monitoring | Yes | Temperature Range | -5 to 70°C /-40°C~85°C |
OEM/ODM | Supported | Warranty Time | 3 years |
Protocols | 10G Ethernet, MSA Compliant |
Features
Application
Standard
Electrical and Optical Characteristics
Electrical Characteristics | ||||||
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Total Supply Current | ICC | 300 | mA | |||
Transmitter | ||||||
Transmitter Differential Input Voltage | 180 | 1200 | mV | |||
Tx_Fault Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
Tx_Fault Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
Tx_Disable Input Voltage - High | VIH | 2 | Vcc | V | LVTTL | |
Tx_Disable Input Voltage - Low | VIL | 0 | 0.8 | V | LVTTL | |
Input Differential Impedance | 90 | 100 | 110 | Ω | ||
Receiver | ||||||
Receiver Differential Output Voltage | 300 | 850 | mV | |||
LOS Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
LOS Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
Output Differential Impedance | 90 | 100 | 110 | Ω |
Optical Transmitter Characteristics | |||||||
Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
Average Output Power | POUT | -6 | -1 | dBm | |||
Center Wavelength | λc | 830 | 850 | 870 | nm | ||
Spectral Width | ∆λ | 0.45 | nm | ||||
Extinction Ratio | ER | 3.5 | dB | ||||
Relative Intensity Noise | RIN | -128 | dB/Hz | ||||
Optical Rise/Fall Time | TR/TF | 28 | 50 | ps | |||
Transmitter and Dispersion Penalty | TDP | 3.2 | dB | ||||
Transmitter OFF Power | POFF | -45 | dBm | ||||
Output Eye Diagram | Complies with IEEE802.3ae | ||||||
Optical Receiver Characteristics | |||||||
Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
Center Wavelength | λc | 830 | 850 | 870 | nm | ||
Receiver Sensitivity | PSEN | -10 | dBm | 1 | |||
Input Saturation Power (Overload) | PSAT | 0.5 | dBm | ||||
LOS De-assert Level | LOSD | -13 | dBm | ||||
LOS Assert Level | LOSA | -30 | dBm | ||||
LOS hysteresis | HYS | 0.5 | 6 | dB |
Note 1. Measured with PRBS231-1 pattern, @10.3125Gbps, ER=4dB, BER=1x10-12.
Compatibility
Gigaopto manufactures and stocks a full range of optical transceivers up to 100G. All of our optical transceiver modules are quality-tested for compatibility with the target switch environment and are 100% compatible with major brands such as Cisco, Brocade, HP, Juniper, HW, Alcatel-Lucent, Extreme, Arista, Force10, D-link, 3Com, etc. and offer a 3-year warranty.
For this GTS-L0896-02DC, please refer to the P/N correspondence table. If you need more compatibility, please don’t hesitate to let us know.
Corresponding Compatible Brand/Part Number | |||
Brand | Part Number | Brand | Part Number |
Gigaopto | GTS-L0896-02DC | Arista | SFP-10G-SR |
Cisco | SFP-10G-SR | Juniper | EX-SFP-10GE-SR |
Dell | 407-BBOU | Brocade | 10G-SFPP-SR |
Aruba | J9150D | H3C | SFP-XG-SX-MM850-A |
HPE ProCurve | J9150A | HW | 0231A0A6 |
HPE BladeSystem | 455883-B21 | Extreme | 10301 |
IBM | 45W2411 | Netgear | AXM761 |
Intel | E10GSFPSRX | Mellanox | MFM1T02A-SR |
Ciena | XCVR-S00Z85 | Avago | AFBR-709SMZ |
Avaya | AA1403015-E6 | Alcatel-Lucent | iSFP-10G-SR |
D-Link | DEM-431XT-DD | F5 NetworkS | F5-UPG-SFP+-R |
Ubiquiti | UF-MM-10G |
Package Outline
Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)
Contact Person: Ophelia Feng
Tel: +86 15882203619