|
Product Details:
|
| Product Name: | 16GFC SFP Transceiver | Bit Category(Gbps): | 16G |
|---|---|---|---|
| Wavelength: | 850nm | Distance: | 100m |
| Optical Component: | VCSEL/PIN | Interface: | LC |
| Keywords: | 16G Fiber Channel SFP+ SW | ||
| Highlight: | DOM MMF Transceiver Module,LC MMF Transceiver Module,850nm sfp 100m |
||
16GFC SFP+ SW 850nm 100m Transceivers
Description
This 16GFC SFP+ SW optical transceiver is designed to support 4G/8G/16G Fibre Channel (FC), suitable for storage area network (SAN) links up to 100m over multi-mode fiber.
This module features a highly reliable 850nm VCSEL transmitter and PIN photo-detector into a duplex LC optical connector.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
All modules are Class 1 laser products that comply with FDA/CDRH and IEC-60825 standards.
Specification
| Form Factor | SFP+ | Max Data Rate | 14.025Gbps |
| Wavelength | 850nm | Max Fiber Distance | 100M @16Gbps |
| Connector Type | Duplex LC | Cable Type | MMF |
| Transmitter | VCSEL | Receiver | PIN |
| TX Power | -6.5~-1dBm | Receiver Sensitivity | <-10.5dBm |
| Temperature Range | 0 to 70°C (32 to 158°F) | Warranty | 36 months |
| OEM/ODM | Supported | DOM | Supported |
| Protocols | MSA Compliant | ||
| Supported Applications | 4G/8G/16G Fibre channel Storage Network in Data Centers | ||
Features
Application
Optical characteristics
The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Transmitter | ||||||
| Center Wavelength | λt | 840 | 850 | 860 | nm | |
| RMS spectral width | Pm | - | - | Note1 | nm | |
| Average Optical Power | Pavg | -6.5 | - | -1 | dBm | 2 |
| Extinction Ratio | ER | 3.5 | - | - | dB | 3 |
| Transmitter Dispersion Penalty | TDP | - | - | 3.9 | dB | |
| Relative Intensity Noise | Rin | - | - | -128 | dB/Hz | 12dB reflection |
| Optical Return Loss Tolerance | - | - | 12 | dB | ||
| Receiver | ||||||
| Center Wavelength | λr | 840 | 850 | 860 | nm | |
| Receiver Sensitivity | Psens | - | - | -10.5 | dBm | 4 |
| Stressed Sensitivity in OMA | - | - | -7.5 | dBm | 4 | |
| Los function | Los | -30 | - | -12 | dBm | |
| Overload | Pin | - | - | -1.0 | dBm | 4 |
| Receiver Reflectance | - | - | -12 | dB | ||
Note:
1. Trade-offs are available between spectral width, center wavelength and minimum OMA, as shown in table 6.
2. The optical power is launched into MMF
3. Measured with a PRBS 231-1 test pattern @14.025Gbps 4.Measured with a PRBS 231-1 test pattern @14.025Gbps,BER≤10-12.
Compatibility
As a global provider of Brand Compatible Networking products, we have made significant investments over the past few years to support our customers, as well as in our physical infrastructure and test equipment platforms. Our overall trusted engineering and testing capabilities allow us to produce a large selection of Brand Compatible Transceivers. This GTS-L089E-02DC is 100% compatible with mainstream optical devices. Below is a table of P/N correspondence for different brand modules. For more compatibility, please don't hesitate to contact us.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTS-L089E-02DC | Brocade | XBR-000192 |
| Cisco | DS-SFP-FC16G-SW | Dell | TDTCP |
| Juniper | QFX-SFP-16GFC-SW | HPE | QK724A |
| Intel |
SFP-16GSR-85 |
IBM |
SFP-16GSR-85 |
Mechanical Dimension
Contact Person: Ophelia Feng
Tel: +86 15882203619
