|
Product Details:
|
| Item: | QSFP-100G-FR Transceiver | Technology: | QSFP28 Single Lambda |
|---|---|---|---|
| Bit Rate (Gb/s): | 106.25Gb/s | Wavelength: | 1310nm |
| Transmission: | 2km | Components: | EML+PIN |
| Fiber Connector: | Double-LC | CDR: | Dual TX & RX |
| Keywords: | QSFP-100G-FR ,Single Lambda Transceiver Module | ||
| High Light: | 1310nm PAM4 Optical Transceiver,QSFP28 PAM4 Optical Transceiver,100g single lambda |
||
QSFP 100G FR1 Single Lambda Optical Transceiver Module (Single Lambda, SMF, 1310nm, 2km, LC, DOM)
Description
The QSFP-100G-FR optical transceiver is a Single Lambda 106.25Gbps Quad Small Form-factor Pluggable QSFP28 module for use in 100GBASE Ethernet. QSFP28 FR provides 100Gb/s throughput up to 2000 meters over single-mode fiber (SMF) with built-in FEC using 1310nm wavelength via a duplex LC connector. This transceiver is fully compliant with QSFP28 Multi-Source Agreement (MSA), 100G Lambda MSA, IEEE 802.3 100GBASE-FR and CAUI-4 standard.
The full-duplex QSFP28 transceiver implements 106.25 Gbps PAM4 transmit and receive signal channel for 100 Gbps data rate. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as Data Center, 100G Ethernet, 400G to 100G breakout applications.
Specification
| Product Name | QSFP 100G FR | Part/ Number | GTQ-L13D1-02DC |
| Form /Technology | QSFP28 Single Lambda | Max Speed (Gbps) | 106.25Gbps |
| Wavelength (typical) | 1310nm | Cable Distance | 2km |
| Connector | LC-Duplex | Fibre Type | SMF |
| LD Type | EML | PD Type | PIN |
| TX Output Power (dBm) | -2.4~4dBm | Rx Sensitivity | <-6.4dBm |
| Power-budget (dB) | 4dB | Overload | >4.5dBm |
| Power Dissipation | ≤4.5W | Ext. Ratio | >3.5dB |
| DIGITAL DIAGNOSTIC MANAGEMENT | Support | Commercial Temperature | 0 to 70°C |
| FEC Function | Support | Modulation Format | PAM4 |
| CDR (Clock and Data Recovery) | Dual TX and RX | OEM/ODM | Supported |
| Warranty | 3 Years | MTBF | 10,000,000Hours |
| Protocols | 100G Lambda MSA 100G-FR Specification compliant | ||
| Note | Full 2000m reach requires the use of FEC on the host platform. | ||
Features
Application
Optical Specifications
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Transmitter (per Lane) | ||||||
| Signaling Speed per Lane | GBd |
53.125± 100pm |
||||
| Modulation format | PAM4 | |||||
| Center wavelength | nm | 1304.5 | 1310 | 1317.5 | ||
| Side-mode suppression Ratio | SMSR | dB | 30 | |||
| Optical output power | PAVG | dBm | -2.4 | 4 | ||
| Outer Optical Modulation Amplitude | OMAouter | dBm | -0.2 | 4.2 | ||
| Launch power in OMAouter minus TDECQ, each lane (min): for extinction ratio>= 4.5 dB | dBm | -1.6 | ||||
| Launch power in OMAouter minus TDECQ, each lane (min): for extinction ratio < 4.5 dB | dBm | -1.5 | ||||
| Transmitter and dispersion penalty eye closure for PAM4 | TDECQ | dB | 3.4 | |||
| Average Launch Power of Off Transmitter | dBm | -15 | ||||
| Optical Extinction Ratio | ER | dB | 3.5 | |||
| RIN17.1OMA | dB/Hz | -136 | ||||
| Optical Return Loss Tolerance | ORL | dB | 17.1 | |||
| Transmitter reflectance | dB | -26 | ||||
| Receiver(per Lane) | ||||||
| Signaling Speed per Lane | GBd |
53.125± 100pm |
||||
| Modulation format | PAM4 | |||||
| Input Operating Wavelength | nm | 1304.5 | 1310 | 1317.5 | ||
| Damage threshold | dBm | 5.5 | ||||
| Average receive Power per Lane | dBm | -6.4 | 4.5 | |||
| Receiver sensitivity(OMA outer) | dBm | -4.5 | SECQ≤1.4dB | |||
| dBm | SECQ-5.9 | SECQ≥1.4dB | ||||
| Receive Power (OMAouter) | dBm | 4.7 | ||||
| Receiver reflectance (max) | dBm | -26 | ||||
| Stressed Receiver Sensitivity (OMAouter) | dBm |
|
-2.5 | |||
Electrical Specification
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Supply Voltage | VCC | V | 3.14 | 3.47 | ||
| Supply Current | ICC | mA | 1154 | |||
| Transmitter | ||||||
| Data Rate | BR | Gbps | 26.5625 | NRZ | ||
| Differential termination mismatch | % | 10 | at TP1 | |||
| TX_DISABLE High | VDH | V | 2 | 3.5 | Input Voltage High | |
| TX_DISABLE Low | VDL | V | -0.3 | 0.8 | Input Voltage Low | |
| TX_FAULT High [assert] | VFH | V | 2 | 3.5 | Output Voltage High | |
| TX_FAULT Low [negated] | VFL | V | -0.3 | 0.8 | Output Voltage Low | |
| Receiver | ||||||
| Data Rate | BR | Gbps | 26.5625 | NRZ | ||
| Differential Output Swing | VRXDIFF | mV | 400 | 900 | At TP4 | |
| Differential Eye Height | VEH | mV | 228 | |||
| Eye Width | UI | 0.57 | ||||
| Los-Output Voltage High | VOH | V | 2 | 3.5 | Output Voltage High | |
| Loss-Output Voltage Low | VOL | V | -0.3 | 0.8 | Output Voltage Low | |
Compatibility
Gigaopto manufactures and stocks a full range of optical transceivers up to 100G. All of our optical transceiver modules are quality-tested for compatibility with the target switch environment and are 100% compatible with major brands such as Cisco, Brocade, HP, Juniper, HW, Alcatel-Lucent, Extreme, Arista, Force10, D-link, 3Com, etc. and offer a 3-year warranty.
For this QSFP28 100G PAM4 2km GTQ-L13D1-02DC, please refer to the P/N correspondence table. If you need more compatibility, please don’t hesitate to let us know.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTQ-L13D1-02DC | Arista | QSFP-100G-FR |
| Cisco | QSFP-100G-FR-S | Juniper | QSFP-100G-FR |
| Mellanox | QSFP28-FR-100G | Dell | Q28-100G-FR |
| Extreme | QSFP28-FR-100G | ||
Pckage Outline
Contact Person: Ophelia Feng
Tel: +86 15882203619
