|
Product Details:
|
| Product Name: | 40GBASE 4X10G-LR | Max Bit-Rate: | 44.4Gb/s |
|---|---|---|---|
| Wavelength: | 1310nm | Media: | SMF |
| LD/PD Type: | DFB/PIN | Fiber Length: | 10km |
| Connector: | MTP/MPO-12 Male | OEM/ODM: | Supported |
| Highlight: | 4x10GBASE-LR, QSFP+1310nm 10km MTP/MPO, 40GBASE QSFP Parallel Single Mode（PSM4）LR4 10km | ||
| High Light: | 40GBASE QSFP+ Transceiver Module,PSM4 QSFP+ Transceiver Module,SMF QSFP+ Transceiver Module |
||
QSFP+ PSM4 4x10GBASE-LR SMF, 1310nm, 10km Optical Transceiver Module for Ethernet and Data Center MTP/MPO-12 DOM
Description
Gigaopto’s GTQ-M13A4-10DC optical transceiver modules are a four-channel, pluggable, parallel, fiber-optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel, PCIe and SAS Applications.
The 40GBASE 4X10G-LR full-duplex optical module offers 4 independent transmit and receive channels, each capable of 11.1Gbps operation for an aggregate data rate of 40Gbps throughput up to 10km using single mode fiber. These modules are designed to operate over single mode fiber systems using 1310nm DFB laser array. An optical fiber cable with an MPO/MTP connector can be plugged into the QSFP module receptacle.
QSFP+ PSM4 is one kind of parallel transceiver which provides increased port density and total system cost savings.
It is suitable to be used in various applications, such as data centers, high-performance computing networks, enterprise core and distribution layer applications.
Note: If this transceiver needs to be used to break out one 40G signal into 4x 10G signals, the interface of the device is required to support the breakout feature.
Specification
| Package | QSFP+ | Max Bit Rate | 44.4Gbps (4×11.1Gbps) |
| Wavelength | 1310nm | Max Cable Link | 10km |
| Connector | MTP/MPO-12 Male | Cable Type | SMF |
| TX Type | 4 x DFB | RX Type | PIN |
| TX Average Power | -6~-1dBm | RX Sensitivity | <-14.4dBm |
| Power budget | 8.4dB | Receiver Overload | >0.5dBm |
| Power Consumption | <2.5W | Extinction Ratio | >4.5dB |
| Digital Optical Monitoring | Supported | Host FEC | Supported |
| Bit Error Ratio (BER) | 1E-12 | Temperature Case Range | 0 to 70°C (32 to 158°F) |
| OEM/ODM | Supported | Warranty | 3 years |
Features
Application
Standard
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit |
| Transmitter | |||||
| Lane Wavelength Range | λc | 1290 | 1330 | nm | |
| SMSR | σ | 30 | dB | ||
| Average Launch Power (each lane) | Pout | -6 | -1 | dBm | |
| Optical Modulation Amplitude (each lane) | OMA | -4 | 3.5 | dBm | |
| Transmitter and dispersion penalty (TDP), each lane | TDP | 2.6 | dB | ||
| Extinction Ratio | ER | 6 | dB | ||
| Average Launch Power of OFF Transmitter (each lane) | Poff | -30 | dB | ||
| Eye Mask Coordinates1:X1, X2, X3, Y1, Y2, Y3 | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | ||||
| Receiver | |||||
| Lane Wavelength Range | λc | 1260 | 1310 | 1355 | nm |
| Receiver sensitivity in OMA, each lane | -12.6 | dBm | |||
| Stressed Receiver Sensitivity in OMA | -10.3 | dBm | |||
| Average Power at Receiver | -14.4 | 0.5 | dBm | ||
| Receiver Reflectance | RR | -26 | dB | ||
| LOS Assert | LOSA | -30 | dBm | ||
| LOS De-Assert | LOSD | -14 | dBm | ||
| LOS Hysteresis | LOSH | 0.5 | dB | ||
1. Hit Ratio = 1×10-12
2. Measured with conformance test signal at TP3 for BER=10-12
Compatibility
Gigaopto manufactures and stocks a full range of optical transceivers up to 100G. All of our optical transceiver modules are quality-tested for compatibility with the target switch environment and are 100% compatible with major brands such as Cisco, Brocade, HP, Juniper, HW, Alcatel-Lucent, Extreme, Arista, Force10, D-link, 3Com, etc. and offer a 3-year warranty.
For this GTQ-M13A4-10DC optical transceiver, please refer to the P/N correspondence table. If you need more compatibility, please don’t hesitate to let us know.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTQ-M13A4-10DC | Arista | QSFP-40G-PLR4 |
| Cisco | QSFP-4X10G-LR-S | HW | QSFP-40G-eSM4 |
| Extreme | 10326 | Juniper | JNP-QSFP-4X10GE-LR |
| Dell | 407-BBQV | Brocade | QSFP-40G-PLR4 |
| D-Link | DEM-QX10Q-PLR4 | Mellanox | MC2210511-PLR4 |
| F5 Networks | F5-UPG-QSFP+PLR4 | Fortinet | FG-TRAN-QSFP+PLR |
| Avago | QSFP-PLR4-40G | Palo Alto Networks | PAN-40G-QSFP-PLR4 |
| H3C | QSFP-40G-LR4-PSM1310 | MikroTik | Q+31DMTP10D |
| Allied Telesis | QSFPPLR4 | Chelsio | SM40G-PLR |
| Edge-Core | ET6401-PLR4 | IBM | QSFP-PLR4-40G |
| Intel | E40GQSFPLR-2 | Ciena | QSFP-PLR4 |
| MRV | QSFP-40G-PLR4 | AvayA | QSFP-PLR4-40G |
| Alcatel-Lucent | QSFP-4x10G-LR | Ixia | QPLR4-PLUS |
Package Dimensions
The module is designed to be complaint with QSFP+ MSA specification. Package dimensions are specified in SFF-8436.
For More of our QSFP+ 40GBASE Transceiver Series, please refer to the following form
| P/N | Description | Reach | TX/RX | TX Power (dBm) | Rx Sens. (dBm) | Interface |
| GTQ-M85A4-02DC | 40G SR4 | 150m | 850nm VCSEL/PIN | -7.6~2.4 | <9.5 | MTP/MPO-12 |
| GTQ-B08A4-02DC | 40G SR BiDi | 150m | 850/900nm VCSEL/PIN | -4~5 | <-11 | LC |
| GTQ-B08A4-04DC | 40G eSR4 | 300m | 850nm VCSEL/PIN | -7.5~0 | <-11 | MTP/MPO-12 |
| GTQ-M13A4-02DC | 40G PSM IR4 | 1.4km | 1310nm FP/PIN | -5.5~1.5 | <-11.5 | MTP/MPO-12 |
| GTQ-L13A4-M2DC | 40GBASE-UNIV | 150m/2km | 1310nm DFB/PIN | -7~4.3/-10~2.3 | <-10/<-13.7 | LC |
| GTQ-L13A4-02DC | 40G LR4 Lite | 2km | CWDM DFB/PIN | -7~2.3 | <-11.5 | LC |
| GTQ-M13A4-10DC | 40G LR4 | 10km | CWDM DFB/PIN | -7~2.3 | <-11.5 | LC |
| GTQ-M13A4-10DC | 40G PSM4 | 10km | 1310nm DFB/PIN | -6~-1 | <-14.4 | MTP/MPO-12 |
| GTQ-M13A4-20DC | 40G eLR4 | 20km | CWDM DFB/PIN | -4.5~2.3 | <-12.5 | LC |
| GTQ-B13A4-40DC | 40G ER4 | 40km | CWDM DFB/APD | -2.7~4.5 | <-21.2 | LC |
| GTQ-M13A4-02DC | 40G PSM4 Lite | 2km | 1310nm DFB/PIN | -6~-1 | <-14.4 | MTP/MPO-12 |
| GTQ-B13A4-30DC | 40G ER4 Lite | 30km | CWDM DFB/APD | -3.7~4.5 | <-18 | LC |
Contact Person: Ophelia Feng
Tel: +86 15882203619
