|
Product Details:
|
| Product Name: | 10GBASE-BX60-U | Type: | SFP+ BiDi |
|---|---|---|---|
| Wavelength: | Tx1270nm/Rx1330nm | Components: | DFB/APD |
| Connector/Polish: | Simplex-LC/UPC | Max Cable Length: | 60km |
| DOM/DDM: | Supported | Power-Budget: | 21dB |
| Keywords: | 10G SFP+ BiDi 60km, WDM SFP+ | ||
| Highlight: | 10Gbps SFP+ Optical Transceiver,BiDi SFP+ Optical Transceiver,LC Singlemode Transceiver |
||
10GBASE-BX60-U 1270nmTX/1330nmRX 60km SFP+ WDM BiDi Optical Transceiver Module DOM
SFP+ BiDi eER 1270nm-TX/1330nm-RX 60km Optical Transceiver Module DDMI Supported
Description
The 10GBASE-BX60-U transceiver is hot pluggable 3.3V Small-Form-Factor transceiver module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-BX
The transmitter section uses a multiple quantum well 1270 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1330 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. That provides 60 km link distance over single-strand single mode fiber.
This BIDI SFP+ eER transceiver is compliant with SFP+ MSA and IEEE 802.3ae standard.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
Featuring low power consumption and high speed, this bidirectional 10G SFP+ transceiver is ideal for data center, 10G Ethernet, SONET OC-192/SDH and Fiber Channel etc.
Specification
| Package/Technology | SFP+ BiDi eER | Typical Data Rate (Gb/s) | 10.3125Gbps |
| Center Wavelength | Tx1270nm/Rx1330nm | Max Cable Length | 60km |
| Connector/Polish | Simplex LC/UPC | Media Type | SMF |
| LD Type | DFB | PD Type | APD |
| TX Power | 1~6dBm | Rx Sensitivity | <-20dBm |
| Power-budget | 21dB | Overload | >-6dBm |
| Power Consumption | ≤1.5W | Extinction Ratio | >3.5dB |
| Transmit and Dispersion Penalty | 2 dB | Modulation Format | NRZ |
| Digital Diagnostic Monitoring | Support | Temp.Range | 0 to 70°C (32 to 158°F) |
| Warranty | 36-month | OEM/ODM | Support |
| Protocols | IEEE 802.3ae, SFP+ MSA, SFF-8431, SFF-8472, CPRI | ||
Notice: When the long reach transceiver is used in short distance transmission, please matched with appropriate attenuator according to the table.
| Distance | ≤ 10km | ≤ 20km | ≤ 30km |
| Attenuator | 12dB | 10dB | 5dB |
Features
Application
Electrical and Optical Characteristics
| Electrical Characteristics | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Total Supply Current | ICC | 350 | mA | |||
| Transmitter | ||||||
| Transmitter Differential Input Voltage | 180 | 1200 | mV | |||
| Tx_Fault Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| Tx_Fault Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Tx_Disable Input Voltage - High | VIH | 2 | Vcc | V | LVTTL | |
| Tx_Disable Input Voltage - Low | VIL | 0 | 0.8 | V | LVTTL | |
| Input Differential Impedance | ZIN | 85 | 100 | 115 | Ω | |
| Receiver | ||||||
| Receiver Differential Output Voltage | 300 | 850 | mV | |||
| LOS Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| LOS Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Output Differential Impedance | ZOUT | 90 | 100 | 110 | Ω | |
| Optical Transmitter Characteristics | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Average Output Power | POUT | 1 | 6 | dBm | ||
| Center Wavelength | λc | 1320 | 1330 | 1340 | nm | GTS-B3296-60Dx |
| 1260 | 1270 | 1280 | GTS-B2396-60Dx | |||
| Spectral Width (-20dB) | ∆λ | 1 | nm | |||
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 3.5 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Optical Return Loss | 12 | dB | ||||
| Transmitter and Dispersion Penalty | TDP | 3.2 | dB | |||
| Transmitter OFF Power | POFF | -45 | dBm | |||
| Output Eye Diagram | Complies with IEEE802.3ae | |||||
| Optical Receiver Characteristics | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Center Wavelength | λc | 1320 | 1340 | nm | GTS-B2396-60Dx | |
| 1260 | 1280 | GTS-B3296-60Dx | ||||
| Receiver Sensitivity | PSEN | -20 | dBm | Note 1 | ||
| Input Saturation Power (Overload) | PSAT | -6 | dBm | |||
| Receiver Reflectance | -12 | dB | ||||
| LOS De-assert Level | LOSD | -21 | dBm | |||
| LOS Assert Level | LOSA | -35 | dBm | |||
| LOS hysteresis | HYS | 0.5 | 6 | dB | ||
Note 1. Measured with a PRBS 231-1 test pattern, @10.3125Gbps, ER=4dB, BER<10-12
Compatibility
All Gigaopto’s transceivers are standards-based and MSA (Multi-Source Agreement) compliant, and rigorously tested and coded in our own facilities to ensure the highest level of performance. We conduct 100% application testing under end-use conditions.
For this GTS-B2396-60DC, please refer to the P/N correspondence table. For more product compatibility, please feel free to contact us.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTS-B2396-60DC | Juniper | EX-SFP-10GE-BX23-60 |
| Cisco | SFP-10G-BX60U | Brocade | SFP-10G-BXU-60K |
| Dell | GP-SFP-10GBX-U-60 | HW | SFP-10G-BXU6 |
| Extreme | 10GB-BX60-U | ||
Contact Person: Ophelia Feng
Tel: +86 15882203619
