|
Product Details:
|
| Product Name: | 10G ZR100 | Data-Rate: | 10Gbps |
|---|---|---|---|
| Package: | SFP+ | Wavelength: | 1550nm |
| TX/RX Component: | EML+APD | Cable Transmission: | 100km |
| Interface: | LC Duplex | DOM: | Supported |
| Keywords: | SFP+ 10GBASE-ZR100, SFP-10G-ZR 100KM | Type: | 10GBASE ZR |
| Highlight: | DOM SFP+ Optical Transceiver,1550nm SFP+ Optical Transceiver,SFP 10g 100km |
||
SFP+ 10GBASE eZR 100KM 1550nm Transceiver Module for 10GbE/Date Center/Fiber Channel
Description
Gigaopto’s GTS-L1596-A0DC is a high performance and cost-effective 10Gb/s SFP+ eZR transceiver module for 10 Gigabit Ethernet links up to an ultra long distance of 100km over Single Mode fiber using a wavelength of 1550nm.
This SFP+ eZR module features a highly reliable 1550nm cooled EML transmitter and APD photo-detector into a LC Duplex optical connector.The module complies with SFP+ MSA specifications SFF-8431, SFF-8432, SFF-8472 and 10 Gigabit Ethernet 10GBASE-ZR/ZW per IEEE 802.3ae standards.
Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472,which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage. All SFP+ transceiver modules meet FDA/CDRH and IEC-60825 standards and are Class 1 laser products.
Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, 10G Ethernet and Fiber Channel etc.Each transceiver is 100% optically inspected and tested for quality, reliability, interoperability and compatibility before shipping.
Specification
| Package | SFP+ | Speed | 10Gbps |
| Wavelength | 1550nm | Cable Distance | 100km |
| Interface | Duplex-LC | Cable Type | G.652 SMF |
| Transmitter | EML Laser | Receiver | APD |
| TX Output Power | 1~5dBm | RX Sensitivity | < -25dBm |
| Power-budget | 24dB | Extinction Ratio | >8.2dB |
| Power Consumption | ≤1.8W | RX Overload | >-6dBm |
| DOM Support | Yes | Temperature Range | 0 to 70°C |
| OEM/ODM | Supported | Warranty | 3 years |
| Compliance | IEC/EN 61000-4-2,IEC-60825 | ||
| FDA 21CFR 1040.10 and 1040.11 | |||
| RoHS | |||
Notice: When the long reach transceiver is used in short distance transmission, please matched with appropriate attenuator according to the table.
| Distance | ≤ 10km | ≤ 30km | ≤ 50km |
| Attenuator | 12dB | 10dB | 5dB |
Features
Application
Electrical and Optical Characteristics
| Electrical Characteristics | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Total Supply Current | ICC | 300 | mA | |||
| Transmitter | ||||||
| Transmitter Differential Input Voltage | 180 | 1200 | mV | |||
| Tx_Fault Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| Tx_Fault Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Tx_Disable Input Voltage - High | VIH | 2 | Vcc | V | LVTTL | |
| Tx_Disable Input Voltage - Low | VIL | 0 | 0.8 | V | LVTTL | |
| Input Differential Impedance | 90 | 100 | 110 | Ω | ||
| Receiver | ||||||
| Receiver Differential Output Voltage | 300 | 850 | mV | |||
| LOS Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| LOS Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Output Differential Impedance | 90 | 100 | 110 | Ω | ||
| Optical Transmitter Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Average Output Power | POUT | 1 | 5 | dBm | |||
| Center Wavelength | λc | 1530 | 1550 | 1565 | nm | ||
| Spectral Width(-20dB) | ∆λ | 1 | nm | ||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | ||||
| Extinction Ratio | ER | 8.2 | dB | ||||
| Relative Intensity Noise | RIN | -128 | dB/Hz | ||||
| Optical Rise/Fall Time | TR/TF | 28 | 50 | ps | |||
| Transmitter and Dispersion Penalty | TDP | 2 | dB | ||||
| Transmitter OFF Power | POFF | -30 | dBm | ||||
| Output Eye Diagram | Complies with IEEE802.3ae | ||||||
| Optical Receiver Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Center Wavelength | λc | 1260 | 1610 | nm | |||
| Receiver Sensitivity | PSEN | -25 | dBm | 1 | |||
| Input Saturation Power (Overload) | PSAT | -6 | dBm | ||||
| Receiver Reflectance | -12 | dB | |||||
| LOS De-assert Level | LOSD | -26 | dBm | ||||
| LOS Assert Level | LOSA | -38 | dBm | ||||
| LOS hysteresis | HYS | 0.5 | 6 | dB | |||
Note 1. Measured with PRBS231-1 pattern, @10.3125Gbps, ER=8.2dB, BER=1x10-12.
Compatibility
Each Gigaopto’s optical transceiver is tested in the host device to verify interoperability, and we promise 100% full compatibility on the specified device with a 3-year warranty.
For this GTS-L1596-A0DC, please refer to the P/N correspondence table. For more product compatibility, please feel free contact us.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTS-L1596-A0DC | Arista | SFP-10G-ZR100 |
| Cisco | SFP-10G-ZR100 | Juniper | EX-SFP-10GE-ZR100 |
| Dell | SFP-10G-ZR100 | Brocade | 10G-SFPP-ZR100 |
| Ciena | 12434 | H3C | SFP-XG-ZR100-SM1550 |
| Extreme | 10GB-ZR100-SFPP | HW | SFP-10G-ZR100 |
Package Outline
Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)
Contact Person: Ophelia Feng
Tel: +86 15882203619
