|
Product Details:
|
| Product Name: | 10GBASE-ER | Speed: | 10Gbps |
|---|---|---|---|
| Form Factor: | SFP+ | Wavelength: | 1550nm |
| Distance: | 40km | Connector: | LC Duplex |
| Power Budget: | 15dB | DOM: | Yes |
| Keywords: | SFP+ 10GBASE-ER, SFP-10G-ER 40km |
SFP+ 10G ER 40km SMF LC Optical Transceiver Module for 10 Gigabit Ethernet and Fiber Channel
Description
GTS-L1596-40DC is a high performance and cost effective module that supports Multi Rate 9.95 to 10.5Gbps and transmission distance of up to 40km on stand single mode fiber.
The module consists of 1550 EML Laser, InGaAs PIN and Preamplifier in a high-integrated optical sub-assembly. All module satisfy class 1 laser safety.
It is compliant with the SFF-8431, SFF-8432,10GFC, ITU-T G.691, 10GBASE-ER/EW and IEEE 802.3ae.
Digital diagnostic monitoring (DDM/DOM) is available via a 2-wire serial interface, as specified in SFF-8472, which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage
Specification
| Form Factor | SFP+ | Data Rate | 10Gbps |
| Wavelength | 1550nm | Max Reach | 40km |
| Connector Type | Duplex-LC | Cable Type | SMF |
| LD Type | EML Laser | Receiver Type | PIN |
| TX Power | -1~+3dBm | RX Sensitivity | < -16dBm |
| Power-budget | 15dB | Extinction Ratio | >8.2dB |
| Power Consumption | ≤1.5W | RX Overload | >0.5dBm |
| DOM Support | Supported | Temperature Range | 0 to 70°C (32 to 158°F) |
| OEM/ODM | Supported | Warranty | 3 years |
| Protocols | SFP+ MSA Compliant, CPRI, eCPRI | ||
Notice: When the long reach transceiver is used in short distance transmission, please match with appropriate attenuator according to the table.
| Distance | ≤ 5km | ≤ 10km | ≤ 20km |
| Attenuator | 7dB | 5dB | 3dB |
Features
Application
Electrical Characteristics
| Electrical Characteristics | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Total Supply Current | ICC | 300 | mA | |||
| Transmitter | ||||||
| Transmitter Differential Input Voltage | 180 | 1200 | mV | |||
| Tx_Fault Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| Tx_Fault Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Tx_Disable Input Voltage - High | VIH | 2 | Vcc | V | LVTTL | |
| Tx_Disable Input Voltage - Low | VIL | 0 | 0.8 | V | LVTTL | |
| Input Differential Impedance | 90 | 100 | 110 | Ω | ||
| Receiver | ||||||
| Receiver Differential Output Voltage | 300 | 850 | mV | |||
| LOS Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| LOS Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Output Differential Impedance | 90 | 100 | 110 | Ω | ||
Optical Characteristics
| Optical Transmitter Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Average Output Power | POUT | -1 | +3 | dBm | |||
| Center Wavelength | λc | 1530 | 1550 | 1565 | nm | ||
| Spectral Width(-20dB) | ∆λ | 1 | nm | ||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | ||||
| Extinction Ratio | ER | 8.2 | dB | ||||
| Relative Intensity Noise | RIN | -128 | dB/Hz | ||||
| Optical Rise/Fall Time | TR/TF | 28 | 50 | ps | |||
| Transmitter and Dispersion Penalty | TDP | 2 | dB | ||||
| Transmitter OFF Power | POFF | -30 | dBm | ||||
| Output Eye Diagram | Complies with IEEE802.3ae | ||||||
| Optical Receiver Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Center Wavelength | λc | 1260 | 1610 | nm | |||
| Receiver Sensitivity | PSEN | -16 | dBm | 1 | |||
| Input Saturation Power (Overload) | PSAT | 0.5 | dBm | ||||
| Receiver Reflectance | -12 | dB | |||||
| LOS De-assert Level | LOSD | -17 | dBm | ||||
| LOS Assert Level | LOSA | -30 | dBm | ||||
| LOS hysteresis | HYS | 0.5 | 6 | dB | |||
Note 1. Measured with PRBS231-1 pattern, @10.3125Gbps, ER=8.2dB, BER=1x10-12.
Compatibility
Gigaopto's optical transceivers are 100% compatible with all major switch brands and will not cause damage to OEM devices.
In order to ensure the quality and compatibility of our products, each product is carefully tested on the corresponding equipment before delivery to customers.
For this 10G ER 1550nm SFP GTS-L1596-40DC compatibility, please refer to the P/N correspondence table. If you can't find the brand or part number you are looking for in the list below, please let us know and we will be delighted to provide you with more details.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTS-L1596-40DC | Arista | SFP-10G-ER |
| Cisco | SFP-10G-ER | Juniper | QFX-SFP-10GE-ER |
| Cisco | SFP-10G-ER-S | Juniper | EX-SFP-10GE-ER |
| Cisco | ONS-SC+-10G-ER | Brocade | 10G-SFPP-ER |
| Dell | 430-4585 | H3C | SFP-XG-ER-SM1550 |
| Dell | SFP-10G-ER | HW | LE0M0XS4FF |
| HPE H3C | JG234A | HW | OSX040N01 |
| HPE ProCurve | J9153A | Extreme | 10GB-ER-SFPP |
| IBM | BN-CKM-SP-ER | Extreme | 10309 |
| Ciena | XCVR-S40V55 | Alcatel-Lucent | iSFP-10G-ER |
| Ciena | 12340 | Avaya | AA1403013-E6 |
Package Outline
Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)
Contact Person: Ophelia Feng
Tel: +86 15882203619
