|
Product Details:
|
| Product Name: | 10GBASE LR | Bit-Rate: | 10Gbps |
|---|---|---|---|
| Form Type: | SFP+ | Wavelength: | 1310nm |
| Media: | SMF | Components: | DFB+PIN |
| Reach: | 10km | Connector: | LC Duplex |
| Keywords: | SFP+ 10GBASE-LR, SFP-10G-LR | ||
| Highlight: | DOM SFP + Module,LC SFP + Module,1310nm 10GBASE LR |
||
SFP+ Module 10GbE Single Mode Fiber SMF Optical Transceiver
10GE Gigabit Ethernet SFP+ 1310nm 10km LC DDM
Description
The 10Gb/s SFP+ LR transceiver module is designed for use in 10 Gigabit Ethernet and max links up to 10km over single mode fiber (SMF) with LC duplex connector.
They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L.
The 10G LR SFP+ transceiver consists of two sections: the transmitter section uses a 1310nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825, the receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Digital optical monitoring (DOM) capability enables diagnostic monitoring through a I2C interface, as specified in SFF-8472.
Featuring low power consumption, high speed, this hot pluggable 10G SFP+ transceiver is ideal for 10 Gigabit Ethernet (10GbE) Switches,Routers,Network Interface Cards (NICs) and Media Converters,etc.
Each SFP+ 10GBASE-LR transceiver is 100% optically inspected and tested for compatibility before shipping.
Specification
| Packaging | SFP+ | Data Rate | 10Gbps |
| Wavelength | 1310nm | Reach | 10km |
| Connector | Dual-LC receptacle | Media | SMF |
| Transmitter | DFB Laser | Receiver | PIN |
| TX Output Power | -8.2~-0.5dBm | RX Sensitivity | <-14.4dBm |
| Power-budget | 6.2dB | Extinction Ratio | >3.5dB |
| Power Consumption | ≤1.0W | RX Overload | >0.5dBm |
| DOM Support | Yes | Temperature Range | Com. or Ind. |
| OEM/ODM | Supported | Warranty Limited Time | 36 months |
| Protocols | IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI | ||
Features
Industrial: -40°C~85°C
Application
Electrical and Optical Characteristics
| Electrical Characteristics | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Total Supply Current | ICC | 300 | mA | |||
| Transmitter | ||||||
| Transmitter Differential Input Voltage | 180 | 1200 | mV | |||
| Tx_Fault Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| Tx_Fault Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Tx_Disable Input Voltage - High | VIH | 2 | Vcc | V | LVTTL | |
| Tx_Disable Input Voltage - Low | VIL | 0 | 0.8 | V | LVTTL | |
| Input Differential Impedance | 90 | 100 | 110 | Ω | ||
| Receiver | ||||||
| Receiver Differential Output Voltage | 300 | 850 | mV | |||
| LOS Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| LOS Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Output Differential Impedance | 90 | 100 | 110 | Ω | ||
| Optical Transmitter Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Average Output Power | POUT | -8.2 | +0.5 | dBm | |||
| Center Wavelength | λc | 1290 | 1310 | 1330 | nm | ||
| Spectral Width(-20dB) | ∆λ | 1 | nm | ||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | ||||
| Extinction Ratio | ER | 3.5 | dB | ||||
| Relative Intensity Noise | RIN | -128 | dB/Hz | ||||
| Optical Rise/Fall Time | TR/TF | 28 | 50 | ps | |||
| Transmitter and Dispersion Penalty | TDP | 3.2 | dB | ||||
| Transmitter OFF Power | POFF | -45 | dBm | ||||
| Output Eye Diagram | Complies with IEEE802.3ae | ||||||
| Optical Receiver Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Center Wavelength | λc | 1260 | 1610 | nm | |||
| Receiver Sensitivity | PSEN | -14.4 | dBm | 1 | |||
| Input Saturation Power (Overload) | PSAT | 0.5 | dBm | ||||
| Receiver Reflectance | -12 | dB | |||||
| LOS De-assert Level | LOSD | -17 | dBm | ||||
| LOS Assert Level | LOSA | -30 | dBm | ||||
| LOS hysteresis | HYS | 0.5 | 6 | dB | |||
Note 1. Measured with PRBS231-1 pattern, @10.3125Gbps, ER=4dB, BER=1x10-12.
Compatibility
Gigaopto's optical transceivers are 100% compatible with all major switch brands and will not cause damage to OEM devices.
In order to ensure the quality and compatibility of our products, each product is carefully tested on the corresponding equipment before delivery to customers.
For this SFP+ 10G LR GTS-L1396-10DC compatibility, please refer to the P/N correspondence table. If you can't find the brand or part number you are looking for in the list below, please don't hesitate to let us know.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTS-L1396-10DC | Arista | SFP-10G-LR |
| Cisco | SFP-10G-LR | Juniper | EX-SFP-10GE-LR |
| Dell | 331-5310 | Brocade | 10G-SFPP-LR |
| Aruba | J9151D | H3C | SFP-XG-LX-SM1310-D |
| HPE ProCurve | J9151A | HW | 0231A0A8 |
| HPE BladeSystem | 455886-B21 | Extreme | 10302 |
| IBM | 45W2421 | Netgear | AXM762 |
| Ciena | XCVR-S10V31 | Mellanox | MFM1T02A-LR |
| Avaya | AA1403011-E6 | Avago | AFCT-701SDZ |
| D-Link | DEM-432XT-DD | Alcatel-Lucent | iSFP-10G-LR 3HE04823AA |
| Ubiquiti | UF-SM-10G | F5 NetworkS | F5-UPG-SFP+LR-R |
Package Outline
Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)
Contact Person: Ophelia Feng
Tel: +86 15882203619
